Tatarigami Titan: Assembly and Painting Guide

Quick answer

The Tatarigami arrives preassembled, so focus on cleaning mold lines and painting the supernatural lightning and storm effects that define this living curse.

Step-by-step assembly and painting process

1. 1. Clean the preassembled miniature: Use a hobby knife and fine sandpaper to remove mold lines and seam marks, especially along the arms, legs, and base. Rinse the model in warm soapy water to remove any release agent residue, then let it dry completely. Common mistake: skipping the wash can cause paint to bead up or peel later.
2. 2. Prime with a neutral base: Apply a thin, even coat of gray or black primer. A neutral primer helps the cool storm colors pop while keeping the curse's body looking dark and ominous. Hold the can 20-30 cm away and use short bursts to avoid pooling. Checkpoint: ensure the primer is fully dry before moving to the next step.
3. 3. Basecoat the curse body: Paint the main body with muted earthy tones such as desaturated browns or dark greens. These colors contrast with the bright lightning and make the supernatural elements stand out. Use thin layers to preserve detail. Common mistake: thick paint can obscure the intricate sculpted textures.
4. 4. Paint the lightning and storm effects: Use a mix of deep blue and purple for the base of the lightning arcs, then layer with lighter blue and finally pure white at the tips. Drybrush a faint blue glaze over nearby surfaces to simulate ambient glow. Checkpoint: practice the lightning pattern on a spare bit or plastic spoon first.
5. 5. Add a wash for depth: Apply a dark wash (like Nuln Oil or a homemade mix) to the curse's body to settle into recesses and add shadow. Wipe away excess from raised areas. Avoid washing the lightning arcs directly, as it can dull the bright colors. Common mistake: letting the wash pool on flat areas creates unattractive stains.
6. 6. Highlight and finish: Edge-highlight the curse's body with a lighter version of your basecoat to bring out the details. For the lightning, add a final dot of pure white at the brightest points. Seal the model with a matte varnish to protect the paint, then apply a gloss varnish to the lightning arcs to make them look electric. Checkpoint: allow varnish to cure for 24 hours before handling or gaming.

Product spotlight

• The Other Side: Tatarigami: The Tatarigami anchors a Kimon Company by suppressing enemy Fate manipulation, commanding storms, and lashing the battlefield with supernatural lightning. The lightning and storm effects are key visual features to emphasize when painting, as they define the model's role on the table.